| Microphone Inputs | (1) Female XLR Pin 2 Hot |
| Input Impedance | 600 ohms balanced |
| Phantom Power | No |
| GAIN | +50 dB |
| EIN | -115dB A-weighted @50dB gain (150 Ohm source impedance) |
| Maximum Input Level | +10dBu |
| Frequency Response | +0, -0.5 dB 20 Hz - 20 kHz, ref. 1 kHz |
| THD+N | <.005%, 20 Hz - 20 kHz |
| Line Inputs | (2) 1/4" TRS balanced or unbalanced |
| Input Impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Maximum Input Level | +12 dBu |
| Microphone Inputs | (1) Female XLR Pin 2 Hot |
| Input Impedance | 600 ohms balanced |
| Phantom Power | No |
| GAIN | +50 dB |
| EIN | -115dB A-weighted @50dB gain (150 Ohm source impedance) |
| Maximum Input Level | +10dBu |
| Frequency Response | +0, -0.5 dB 20 Hz - 20 kHz, ref. 1 kHz |
| THD+N | <.005%, 20 Hz - 20 kHz |
| Line Inputs | (2) 1/4" TRS balanced or unbalanced |
| Input Impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Maximum Input Level | +12 dBu |
| Frequency Response | +0, -0.2 dB 20 Hz - 20 kHz, ref. 1kHz |
| THD+N | <.009% A/D, 20 Hz - 20 kHz |
| Instrument Input | (1) 1/4" mono jack |
| Input Impedance | 1 MOhm unbalanced |
| Maximum Input Level | +8.5 dBu |
| Frequency Response | +0, -1 dB 20 Hz - 20 kHz, ref. 1 kHz |
| THD+N | <.125% A/D |
| Crosstalk | <-74dB any input or output to any recording channel,
20Hz - 20kHz <-95dB at 1kHz typical |
| Line Outputs | (2) 1/4" TRS bal./unbal. +(2) RCA |
| Level | +16dBu maximum (1/4" TRS) |
| Impedance | 1k ohm balanced, 500 ohm unbalanced |
| Headphone Output | (1) 1/8" stereo jack
20 mW per channel at 50 Ohms
|
| D/A - A/D Sample Rate | 44.1 kHz or 48 kHz (determined by computer application) |
| Dynamic Range | A/D (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz
D/A (24 Bit) 100 dB typical, A-weighted, 20 Hz - 20 kHz
A/D/A (24 Bit) 97 dB typical, A-weighted, 20 Hz - 20 kHz |
| USB Type B Socket | Version 1.1, Version 1.1 hubs are not supported |
| Power Requirements | USB Bus-Powered |
| Dimensions | 6.75" Wx 1.6" Hx 6.5"D |
| Weight | 1.1 lbs. (0.49kgs) |
