Výčet vlastností
With a wealth of features - including new dbx® 63V high-voltage, ultra low noise mic preamps, dbx dynamics (comparator, limiter, gate) and EQ, a hardware monitor reverb, and a software suite that includes the new Pantheon™ II VST/AU reverb plug-in – the Lexicon I·ONIX FW810S is more than just an 10-input, 12-output FireWire audio interface. It’s a pro recording studio in a single rack unit. Newly designed dbx mic preamps are included on every channel and run on a 63V supply to guarantee headroom and provide you with a superior recording across a wide dynamic range. The preamps are exceptionally transparent and deliver deeper lows, smoother highs, and an overall fuller sound that will make your recordings sound more amazing than ever.
Ultra high-definition converters ensure pristine 24-bit/96kHz audio. And with built-in dbx Type IV™ conversion, your digital recordings will preserve their dynamic range even when levels get too high. Now instead of hard clipping the peaks, your recordings will acquire that forgiving, oversaturated quality once found on big analog recorders. Type IV conversion actually gives you more headroom, capturing the subtle details in higher level signals instead of hard clipping them. Plus, the Lexicon I
•ONIX FW810S adds a powerful Mixer with integrated dbx dynamics (compresser, gate, limiter) and EQ. The Mixer’s true-to-life user interface feels familiar from the second you start using it, making it easy to adjust levels, route signals through 10 inputs and 12 outputs, and preview reverbs and dynamics. And the I•ONIX FW810S does the processing, so you can mix and fine tune your recordings in real time with zero latency. With so many powerful recording tools, the I·ONIX FW810S is the ultimate hardware and software interface that transforms your computer into a professional 24-bit/96 kHz recording studio.
Lexicon’s new FireWire™ audio interface featuring dbx® mic pre’s and dynamics
KEY FEATURES:
• Zero latency Lexicon monitor reverb
• dbx® high-voltage, ultra low noice mic pre's on all 8 channels
• dbx dynamics (compressor, limiter, gate, EQ) on all 8 channels
• 6 analog combi-jack inputs on the rear panel for mic/line inputs
• 2 front panel combi-jacks accept mic, line, or instrument signals
• Type IV conversion feature emulates tape saturation at high levels
• Zero latency mixer hardware UI with dbx dynamics and a hardware monitor reverb
• 44.1 to 96KHz sample rates, 24 bit processing
• 8 analog TRS outputs (7.1 surround capable) and stereo main (control room) outs
• Stereo S/PDIF digital I/O
• MIDI In and Out
• FireWire 400 connection to DAW
• Software suite includes Steinberg's Cubase LE 4, Toontrack EZ Drummer lite, and Lexicon Pantheon II reverb plug-in
• Low Latency drivers include Windows WDM with ASIO support along with and Macintosh CoreAudio with ASIO support
Microphone Inputs: Female XLR Pin 2 Hot
Input Impedance: 3kW balanced
PhantomPower: +48 Volts
Maximumgain: +55 dB
E.I.N. (at max gain): −127 dB @ 55 dB gain typical (150W source) −130 dB @ 55 dB gain typical A-weighted (150W source)
MaximumInput Level: +8 dBu
Frequency Response: +/−1.5 dB, 20Hz - 20kHz
THD+N: <0.02%, 20Hz - 20kHz <0.002%,1kHz, -6 dBu
Line Inputs: 1/4” TRS balanced or unbalanced
Input Impedance: 20kΩbalanced, 13kΩunbalanced
MaximumInput Level: +22 dBu
Frequency Response: +/−1.5 dB, 20Hz - 20kHz
THD+N: <0.02%, 20Hz - 20kHz <0.002%, 1kHz, +18 dBu
Instrument Input: 1/4” TS unbalanced
Input Impedance: 500 kW
MaximumInput Level: +10 dBu
Frequency Response: +/−2.5 dB, 20Hz - 20kHz
THD+N: <0.08%, 1kHz, +4 dBu
Line Outputs: 1/4” TRS balanced or unbalanced
Level: +20 dBu maximum
Impedance: 32ΩBalanced, 16ΩUnbalanced
Headphone Output: 1/4” stereo jack 250mW per channel at 50Ω
MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out
Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range: A/D (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements: 100 – 240 VAC, 50/60 Hz, 30 Watts
Dimensions: 19”W x 1.75”H x 10.5”D
Weight: 7.7 lbs.